Model DM-170A Miniature Strip Heater

Miniature Strip Heater
Designed for heating applications where the heater must be securely fastened to a heat absorbing surface. The unit is clad with oxidation resistant stainless steel to prolong optimum heat transfer. The unit is supplied with 2.25 inch long nickel ribbon leads, and is available in multiple electrical ratings up to 150 watts at 115 volts.


Request Quote

Miniature Strip Heater(Model # DM-170A)

Designed for heating applications where the heater must be securely fastened to a heat absorbing surface. The unit is clad with oxidation resistant stainless steel to prolong optimum heat transfer. The unit is supplied with 2.25 inch long nickel ribbon leads, and is available in multiple electrical ratings up to 150 watts at 115 volts.

Normally open timers close contacts after applied power. To increase timing turn adjustment screw so that contact gap is increased

Normally closed timers open contacts after heater coil is energized. To increase timing turn adjustment screw in the direction that increases contact pressure.

Click Here For Drawing

Features / Ratings
  • Application requires the heater to be securely fastened to a flat, heat absorbing surface
  • Insulated with highest grade natural mica
  • Stainless steel construction to resist oxidation for optimum heat transfer performance.
  • Supplied with 2-1/4" long nickel ribbon leads
  • Available in ratings up to 150 watts at 115V
  • Mounting: 2 diagonal holes 1-3/8"
  • Dimensions: L. 1-5/8" x W. 13/16" x H. 1/8"